|
|
| Case Hardening |
| |
Hardening the entire surface of a low carbon steel to a specific depth.
|
|
| Cavitation |
| |
A localized gaseous condition within a liquid stream which occurs where the pressure is reduced to the vapor pressure.
|
|
| Charge Pressure |
| |
The pressure at which replenishing fluid is forced into the hydraulic system.
|
|
|
|
| Check Valve |
| |
A valve which permits flow of media in one direction only.
|
|
| CK |
| |
If 'CK' is at the end of a SKU, there is a check valve located in the item.
|
|
| Cold Flow |
| |
Continued deformation under load.
|
|
| COM |
| |
Compression -
Tubing Compression Fitting
Requires no Flaring or Soldering before use
|
|
| Connect Under Pressure |
| |
The ability to connect coupling halves with internal line pressure applied to either both sides or one side.
|
|
| Contamination |
| |
Any material foreign to a media that has a harmful effect on its performance in a system.
|
|
| Coupling, Female Half |
| |
a.k.a. Coupler/Socket/Body
|
|
| Coupling, Male Half |
| |
a.k.a. Nipple/Plug/Adapter
|
|
| Coupling, Quick Disconnect |
| |
A component which can quickly join or separate a fluid line without the use of tools or special devices.
|
|
| CS |
| |
The measure of a seal as viewed if cut at a right angle to the mold parting line.
|
|
|
|
|
|
|
|
 |
|
|
|
