Top : Fitting : Steel : Flareless

Flareless Compression Fittings The cutting ring fitting was invented by Ermeto in Germany in the 1930s.  Hannifin acquired Ermeto and introduced the fittings to the US. Today these fittings are standardized in ISO 8434. Commonly known as compression fittings, flareless fittings are used in medium to high pressure applications. They are made up of a nut, ferrule and the fitting body. The nut and ferrule slide over a tube with an OD that matches the ID of the receiving fitting. Flareless hydraulic fittings do not require a flaring operation and are used on medium to heavy walled tubing. The Fittings Configuration Follows the Order Found in the Description of the Individual Parts. Sizing    02 = 1/8"      03 = 3/16"    04 = 1/4"    06 = 3/8"      05 = 5/16"    08 = 1/2"    10 = 5/8"    12 = 3/4"    14 = 7/8" 16 = 1"        20 = 1-1/4"        24 = 1-1/2" 32 = 2"

C2402 Comp - MJ C2403 Comp - Comp C2404 Comp - MP C2405 Comp - FP C2406 SP - Comp C2700 Comp - Comp Bulkhead C6400 Comp - MB C2503 Comp - MP 45° C6802 Comp - MB 45° C2500 Comp - Comp 90° C2501 Comp - MP 90° C2502 Comp - FP 90° C6801 Comp - MB 90° C2601 Comp TEE w/ MP Branch C2602 Comp TEE w/ FP Branch C2603 Comp TEE C2605 Comp TEE w/ MP Run C2606 Comp TEE w/ FP Run C6803 Comp TEE w/ MB Branch C6804 Comp TEE w/ MB Run C2650 Comp Cross C2408 Plug C304-C Comp Cap C318 Nut C319 Ferrule