Hose
Hose End
Fitting
Tubing
Clamp
Coupler
Valve
Monitor
Pneumatic
Seal
DOT Trucking
Dixon Valve
BVA Hydraulics
Reel Source
Interchanges
Top
:
Fitting
:
Brass
:
SAE 45° Flare
:
FLARE
TEE
HF144F
|
Male SAE 45° Flare TEE AdapterDimensionsA TEEs order is Run by Run by Branch Sizing 02 = 1/8" 03 = 3/16" 04 = 1/4" 05 = 5/16" 06 = 3/8" 08 = 1/2" 10 = 5/8" 12 = 3/4" 14 = 7/8" 16 = 1" Assembly Cut Tubing to Desired Length Slide Nut on Tube Threaded End of Nut Facing the Fitting Body Flare End of Tube with 45° Flare Tool Measure Flair Diameter Examine Flare for Excessive Thin Out Lubricate Threads & Assemble to Fitting Body Nut Should be Turned Hand Tight Tighten Assembly with Wrench until a Solid Feeling is Reached From that Point, Apply a 1/6th Turn Do Not Over Torque as it May Damage the Flare or Split the Tubing at the Flare Temperatures and Type of Tubing Used Determine Working Pressures For the Chart Provided, Pressures are @ 73°F and Using Copper Tube OD Tube Wall Pressure 1/8in 0.030in 2800psi 3/16in 0.030in 1900psi 1/4in 0.030in 1400psi 5/16in 0.032in 1200psi 3/8in 0.032in 1000psi 1/2in 0.032in 750psi 5/8in 0.035in 650psi 3/4in 0.035in 550psi 7/8in 0.035in 450psi Jump Sizes Are Not SAE 010401 |
|
